#Toshiba universal printer 2 user manual manual#
#Toshiba universal printer 2 user manual Pc#
#Toshiba universal printer 2 user manual series#

16, 2008) 2.1 Replacing the CPU PC Board NOTES: 1. MAJOR UNIT REPLACEMENT EO18-33024 (Revision Date: Dec.

Left Side Cover 13) Mount the right side cover to the printer while fitting the tabs on the right side cover into the slots of the printer enclosure. Be careful not to catch the cable by the cover while reassembling. MAJOR UNIT REPLACEMENT EO18-33024 2.1 Replacing the CPU PC Board NOTE: It is easy to mount the left side cover if you fit the tabs from the LCD side in order, then secure the bottom side. Doing so may cause the Top Cover not to open. Do not reassemble the Front Cover while the Top Cover Open Button is pressed. Make sure that the pins on the both sides of the front cover are fit in position, as shown in the pictures below. MAJOR UNIT REPLACEMENT EO18-33024 2.1 Replacing the CPU PC Board 11) Close the front cover. T-2x5 Screw Earth Terminal 10) Replace the CPU PC Board with a new one, then reassemble in the reverse order of removal. CPU PC Board Hook 9) Remove the screw, then remove the Earth Terminal. MAJOR UNIT REPLACEMENT EO18-33024 2.1 Replacing the CPU PC Board 8) Open the Hooks, then remove the CPU PC Board from the Front Cover. FPC Cable CPU PC Board Connector Lock 7) Disconnect the Earth Terminal from the Drive PC Board. NOTE: Before disconnecting the FPC Cable, release the Connector Lock. CPU PC Board Front Cover 6) Disconnect all Connectors and FPC Cable from the CPU PC Board. MAJOR UNIT REPLACEMENT EO18-33024 2.1 Replacing the CPU PC Board 7) Remove the Front Cover. Gear 6) Remove the Right Side Cover and the FroДў. Be careful not to drop and break or lose them. Top Cover Top Cover Open Button Left Side Cover NOTE: The Gears shown in the picture below are not secured and are easily removed. 5) Remove the Left Side Cover in the direction of the arrow. MAJOR UNIT REPLACEMENT EO18-33024 2.1 Replacing the CPU PC Board 4) Press the Top Cover Open Button to open the Top Cover. In the United States, used lithium ion batteriesДў. Be careful not to damage the print head while removing and reassembling. Since a lot of small moulded parts are used in this printer, care must be taken not to damage or lose them. Be careful not to injure your fingers when replacing the main parts. Disconnect the power cord before installing the main parts. MAJOR UNIT REPLACEMENT EO18-33024 2.1 Replacing the CPU PC Board 2. 2) Confirm that none of the accessories are missing. 1.2 Checks 1) Check for damage or scratches on the machine. NOTE: Keep the carton and pad for future transportation of the printer. 2) Unpack the accessories from the carton. UNPACKING 1.1 Procedure 1) Open the carton.

#Toshiba universal printer 2 user manual manual#

NOTE: Failure to follow manual instructions or any unauthorized modification, substitution orchange to this product will void the limited product warranty.

Failure to do so could create safety hazards such as fire or electrocution.

#Toshiba universal printer 2 user manual series#

TOSHIBA Potable Printer B-EP2DL SERIES Maintenance Manual Document No.